Penrite RED OEM COOLANT CONCENTRATE/PREMIX
Red OEM Coolant Concentrate is a GENUINE GLYSANTIN® G40® Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A", Ethylene glycol, Anti-Freeze Anti-Boil CooIant as used in initial manufacturer factory fills. It uses a technically advanced Si-OAT (Organic Acid Technology) based inhibitor system that is Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 8 years or 500,000km. It is available in both concentrate and premix formulations.
| Benefits | OEM Approved to maintain manufacturer’s warranty & specifications, compatible with all plastics, rubbers and seals. |
|---|
application
Red OEM Coolant Concentrate is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel engines that require full Si-OAT Type A anti-freeze / anti-boil / anti-corrosion properties.
Red OEM Coolant Concentrate is suitable for cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi, Bentley, Bugatti, Lamborghini, VW, Seat and Skoda (all 2008 on), MAN trucks (Dec 2011 on), Mercedes-Benz trucks (Oct 2011 on) and Porsche (911, Boxster, Cayman, Cayenne, Panamera) 1997 onwards.
Red OEM Coolant Concentrate provides extended long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is especially effective in all aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use red, magenta or orange coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Red OEM Coolant Concentrate should be used at a concentration level of 50% or as per manufacturer recommended dosing rates. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
Red OEM Coolant Concentrate is suitable for cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi, Bentley, Bugatti, Lamborghini, VW, Seat and Skoda (all 2008 on), MAN trucks (Dec 2011 on), Mercedes-Benz trucks (Oct 2011 on) and Porsche (911, Boxster, Cayman, Cayenne, Panamera) 1997 onwards.
Red OEM Coolant Concentrate provides extended long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is especially effective in all aluminium engines that are under load or used in extreme hot and cold climates. It may be used in all types of vehicles that use red, magenta or orange coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.
Red OEM Coolant Concentrate should be used at a concentration level of 50% or as per manufacturer recommended dosing rates. We recommend using Penrite De-Mineralised Water when mixing although the phosphate free formulation allows it to be mixed with normal tap water if necessary.
Penrite recommend mixing at the manufacturers recommended concentration levels.
CONCENTRATE
CONCENTRATE
Mix Ratio 33% 50%
Freezing Point -18°C -38°C
Boiling Point +104°C +109°C
PREMIX
PREMIX
Mix Ratio 50%
Freezing Point -38°C
Boiling Point +109°C
benefits
- 8 Year or 500,000 km (whichever comes first) drain intervals if used and maintained at 50%
- OEM Approved to maintain manufacturer’s warranty & specifications.
- Compatible with all plastics, rubbers and seals.
- Protects all internal surfaces from corrosion, including aluminium.
- Phosphate free formulation allows use with hard water.
- Borate, nitrite and amine free
MANUFACTURER'S (OEM) APPROVALS & INDUSTRY LICENSES
- Audi TL 774-G
- Bentley TL 774-G
- Bugatti TL 774-G
- Cummins CES 14603
- Deutsche Bundeswehr TL 6850-0038/6
- Deutz DQC CC-14
- Deutz Fahr Harvesters (from 04/2017)
- Ducati (Approved)
- Irizar (from 09/2016)
- Lamborghini TL 774-G
- Liebherr Minimum LH-01-COL3A
- MAN 324 Type Si-OAT
- MB-Approval 325.5
- MB-Approval 325.6
- MB-Approval 326.6
- MTU MTL 5048
- Porsche (From 2010)
- Seat TL 774-G
- Setra MB-Approval 325.5
- Skoda TL 774-G
- Smart MB-Approval 325.6 (from 05/2014)
- VW TL 774-G
INDUSTRY & MANUFACTURER'S PERFORMANCE LEVELS
- AS 2108-2004 Type A
- ASTM D-3306
- Audi TL 774-G
- Bentley TL 774-G
- BS 6580
- Bugatti TL 774-G
- Cummins CES 14603
- CUNA NC 956-16
- Deutz AG 0199-99-1115/2091
- Fiat 9.55523
- Ford M97-B44-D
- G12++
- German Army TL6850-0038/1
- Glysantin® G40®
- GM 1825M
- GM 1899M
- GM 6277M
- GM Holden 6277M
- Jaguar M97-B44-D
- JASO M325 (Japan)
- Jenbacher TA 1000-0201
- JI Case JIC 501
- JIS K2234 (Japan)
- KSM 2142 (Korea)
- Lamborghini TL 774-G
- MAN 324 Type Si-OAT
- MB 325.5.
- MB 325.6.
- MB 326.3 (Premix Only)
- Mitsubishi ES-X64217
- Nissan NES M5059
- Opel B 040 1065
- Renault 41-01-001Q Type D
- SAAB GM6277M
- SAE J1034
- Scania T1.02-98 0813
- Skoda TL 774-G
- Smart MB 325.6
- Toyota Long Life TSK2601G
- UNE 26.361.88
- Vauxhall B 040 1065
- VW TL 774-G
- G13
- VW G13